TANABE SUSTEC PRO CR COILOVERS

TANABE SUSTEC PRO CR COILOVERS

 Tanabe introduces their Sustec Pro Comfort-R (CR) coilovers. The new Sustec Pro CR coilovers are brand new coilovers designed to provide the maximum amount of comfort with a balance of performance and height adjustability. The Sustec Pro CR uses advanced dampers made by KYB and offers a twin tube design which have smooth rebound characteristics for additional ride comfort. Made and tested on every vehicle application to meet the maximum comfort levels and direct fit.

Sustec Pro CR uses the same high quality PRO210 Springs found on the SUSTEC PRO FIVE Coilover System. These are the same springs that were used in the Reito MOLA GT-R & Keihin Real Racing HSV-010 in the JGTC GT500 Class in Japan.

Features

– Ride Height Adjustable

– Dampers Produced by KYB

– Twin Tube Design

– Smooth Ride

– 1 Year Warranty

Retail Pricing

$890-$1190

Read More at:

RS-R SPORTS-I COILOVERS : 2015+ SUBARU WRX

6927df2a62d8cb475ba659e4a69207be (1).jpg

RS-R SPORTS-I COILOVERS : 2015+ SUBARU WRX

RS-R, one of Turn 14 Distribution’s newest brand additions, introduces their Sports-I coilovers for the 2015+ Subaru WRX. Designed for the performance enthusiast in mind, the RS-R Sports-I coilover system provides a comfortable ride for everyday use, yet is sufficient enough for those effervescent track days. These 36-way adjustable coilovers will lower the WRX .2″-3.1″ in the front and .4″-3.5″ in the rear and include upper mounts. Independent ride height and preload adjustments allow you infinite handling adjustments.

Specifications

Preset Approximate Height From RS-R:
Front -35mm (-1.4inch)
Rear -35mm (-1.4inch)

Maximum Adjustment Ranges:
Front -5mm to -80mm (-0.2inch to -3.1inch)
Rear -10mm to -90mm (-0.4inch to -3.5inch)

Recommended Adjustments for Optimal Ride-ability:
Front -15mm to -60mm (-0.6inch to -2.4inch)
Rear -20mm to -60mm (-0.8inch to -2.4inch)

Spring Rates:
Front 7.00kg/mm
Rear 7.00kg/mm

– Dampers are 36 way adjustable in the front and the rear.

– Warranty 1 Year / 12,000miles from the day of purchase.

Application

2015+ Subaru WRX

Part Number

MAP: $1799.00

 

Read More at:

SPC PERFORMANCE ADJUSTABLE REAR CONTROL ARM : 2011+ SCION TC

SPC PERFORMANCE ADJUSTABLE REAR CONTROL ARM : 2011+ SCION TC

SPC has released a rear adjustable control arm to adjust camber on the 2011+ Scion Tc. Simply replace the rear upper control arm with this adjustable arm. This arm includes SPC’s xAxis™ sealed flex joint on the outboard end and a bonded rubber bushing on the inner end to maintain factory ride characteristics.

Rear Adjustment Range: ±2.0° Camber
Installation time: .5 hr/side
Required: 1 kit per wheel

Applications

Scion: 2011+ tC
Lexus: 2011+ CT and 2010 – 2012 HS

Part Number

MISHIMOTO TOP MOUNT INTERCOOLER AND CHARGE PIPE: 2015 SUBARU WRX

MISHIMOTO TOP MOUNT INTERCOOLER AND CHARGE PIPE: 2015 SUBARU WRX

Reduce high intake temperatures on your stock or modified 2015+ WRX with Mishimoto’s direct-fit top-mount intercooler kit. The stock top-mount intercooler is prone to heat soak during repeated wide open throttle pulls and during track use. Mishimoto engineers spent months designing and testing this new intercooler to ensure optimum performance on both the street and track. This intercooler utilizes durable cast aluminum end tanks TIG-welded to a highly efficient, dense bar-and-plate core. The Mishimoto intercooler has a 4″ thick core and a total volume of 625 in3, making it one of the largest topmount intercoolers you can buy.

Thanks to this volume and a very dense offset fin pitch, Mishimoto is able to optimize heat transfer and support vehicles from stock up to 500 whp. This intercooler endured rigorous testing, showing a 35°F temperature drop as well as a +15 whp and +8 wtq bolt-on power increase for our test vehicle equipped with a Mishimoto downpipe and stage 2 EcuTek tune. Installation is simple, requires no modification to any parts in the engine bay, and can be completed in under 1 hour. Included with this intercooler is Mishimoto’s innovative charge-pipe, utilizing a one-piece construction without the need for several couplers and clamps. An application-specific air splitter is included with the intercooler to help divert the maximum amount of air into your Mishimoto intercooler.

The kit also includes a new charge-pipe to intercooler hose, an intercooler to throttle body hose, and a new bypass valve hoses. These components negate the need to gather supplies for installation, and they ensure years of reliable service. This intercooler is available in a durable powder-coated finish of Sleek Silver and Stealth Black, with your choice of either a polished, wrinkle black, or wrinkle red pipe, and, like all our 2015 WRX parts, it includes the Mishimoto Lifetime Warranty.

Features and Benefits

– Direct fit for the 2015+ Subaru WRX 
– Provides 35°F temperature drop compared to stock intercooler on a stage 2 tune
– Proven +15 whp and +8 wtq bolt-on power increase on a stage 2 tune
– 4″ thick core with 625 in3 of core volume produces optimal heat transfer for vehicles from stock to 500 whp
– 100% aluminum construction with durable cast end tanks TIG-welded to a highly efficient bar-and-plate core
– Intercooler core designed for maximum cooling efficiency and minimal pressure drop
– Includes larger air duct designed to provide optimal airflow to the Mishimoto intercooler core
– Includes the Mishimoto intercooler charge-pipe for maximum airflow and power capability
– Includes new BPV hoses, hot side coupler, and silicone throttle body hose
– Comes with all necessary hardware, clamps, and brackets for an easy installation
– Pre-marked area for NPT sensor
– Cooler available in durable powder-coated Sleek Silver or Stealth Black finish
– Mishimoto Lifetime Warranty

Application

2015+ Subaru WRX

Part Numbers

Black top mount intercooler (charge pipe NOT included)

MAP: $740.00

Silver top mount intercooler (charge pipe NOT included)

MAP: $740.00

Black Top-Mount Intercooler Kit with Wrinkle Red Pipe

MAP: $976.00

Silver Top-Mount Intercooler Kit with Wrinkle Red Pipe

MAP: $976.00

Black Top-Mount Intercooler Kit with Black Pipe

MAP: $976.00

Silver Top-Mount Intercooler Kit with Black Pipe

MAP: $976.00

Black Top-Mount Intercooler Kit with Polished Pipe

MAP: $976.00

Silver Top-Mount Intercooler Kit with Polished Pipe

MAP: $976.00

Wrinkle Black Charge Pipe Only

MAP: $272.00
For more visit Cartrix
Blog

TURBOSMART TWIN PORT IWG-75 INTERNAL WASTEGATE ACTUATORS

TURBOSMART TWIN PORT IWG-75 INTERNAL WASTEGATE ACTUATORS AVAILABLE AT CARTRIX

Turbosmart’s new Twin Port IWG-75, available in both turbo-specific and universal applications, gives you improved ability to control a wider range of boost from your internally wastegated turbocharger.

The Twin Port IWG-75 uses the air pressure differential between two sealed chambers to create a dynamic force which overcomes the mechanical spring force of the actuator.This technology results in a boost curve that is much more precise, and allows for a much wider boost range between minimum boost and maximum boost than the single tier control offered by conventional actuators. This makes it ideal for traction limited applications, such as front-wheel drive street or drag racing vehicles.

The Twin Port is currently available to suit Borg Warner’s EFR range of high performance internally- wastegated turbochargers, along with a universal fit model which can be used with our range of clevis rod ends, with more applications coming in the future.The entire Turbosmart wastegate actuator range has been designed to be a stronger and more reliable replacement for OEM type parts.Turbosmart’s focus on actuator performance means boost comes on faster and holds on longer.

The Turbosmart IWG-75 actuator range features

• Stable boost control

• Improved boost response

• Flatter boost curve in the top end

• Interchangeable springs for a great range of boost levels

Part Numbers and Pricing

IWG75 Borg Warner TP B1 Single Scroll 14psi

MAP: $179.99

 

IWG75 Borg Warner TP B1 Twin Scroll 14psi

MAP: $179.99

 

IWG75 Borg Warner TP B2 Single/Twin Scroll 14psi

MAP: $179.99

 

IWG75 TP Universal 150mm Rod 14psi

MAP: $179.99

Read More at:


ignore:
vraceworks, project jdm, full throttle, tristate motorsports

GREDDY SUPREME SP EXHAUST: 2015+ SUBARU WRX/STI

GREDDY SUPREME SP EXHAUST: 2015+ SUBARU WRX/STI AVAILABLE AT CARTRIX

 

Greddy introduces their Supreme SP catback exhaust system for the 2015+ Subaru WRX/STI. The Supreme SP for the (VA) Subaru Sedan features large dual oval mufflers and quad staggered tips in a “tucked-away” layout, for maximum muffler ground clearance. Large 76mm (3”) piping is carefully routed around the rear differential to a centralized Y-section for more even flow. This creates and improved performance with exceptional sound for both the EJ powered STI and FA powered WRX applications. The system is finished off with classic quad Supreme SP 89mm laser engraved GReddy tips. Like all GReddy Supreme SP systems, the fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty.

Applications

2015+ Subaru WRX
2015+ Subaru WRX STI

Part Number

10168202

MAP: $1040.25

Read More at:


similar to:
vraceworks, project jdm, full throttle, tristate motorsports

RADIUM ENGINEERING FUEL PULSE DAMPERS

RADIUM ENGINEERING FUEL PULSE DAMPERS AVAILABLE AT CARTRIX

 

Radium Engineering has developed high performance fuel pulse dampers for both direct mount and in-line configurations. Turn 14 Distribution will be stocking all of these part numbers. This innovative new product is ideal for vehicles with upgraded fuel injectors which effect consistent fuel pressures. Details on these new fuel pulse dampers are listed below.

What is a fuel pulse damper?

A fuel pulse damper is used in fuel injection systems to attenuate pressure pulsations generated by the fuel pump and by the injectors opening and closing. These hydraulic pulses can cause an undesirable noise, which can be transmitted to the passenger compartment. These pulsations are often undetectable with a liquid-filled analog mechanical fuel pressure gauge because they happen so quickly. The fuel pulse damper works by allowing the volume of the fuel system to change slightly to absorb the pulses. This is done with a spring loaded flexible diaphragm.

Not only do the pulsations have an undesirable effect on cabin NVH (noise vibration and harshness), they can also contribute to mysterious lean spots in fuel delivery. These are often the result of the hydraulic pulses acting in harmonic resonance with the injectors opening and closing. In some vehicles, these lean spots can result in stumbling during acceleration.

How do Radium Engineering fuel pulse dampers improve fuel delivery?

Most boosted engines use a pressure referenced regulator where fuel pressure rises 1:1 as boost pressure rises. If the damper is tuned from the factory for a specific single fuel pressure, then it becomes ineffective as fuel pressure rises outside of the normal range. To address this issue, Radium has designed the first aftermarket vacuum referenced fuel pulse damper. Radium Engineering Fuel Pulse Dampers are CNC machined from aluminum, anodized, and laser engraved. They are resistant to all fuel types including alcohol blends such as E85. This new FPD design maintains full damping function throughout the range of pressures seen in the fuel system of a boosted engine with a 1:1 vacuum referenced regulator.

Direct Mount Fuel Pulse Dampers

Radium Engineering offers two designs of their direct mount fuel pulse dampers. The FPD-R (green top) is slightly shorter than the FPD-XR (black top) allowing it to be used in space-constrained applications.

FPD-R base pressure requirement = 40 – 45psi (static)
FPD-XR base pressure requirement = 43 – 78psi (static)

Parts Included

– Anodized and laser engraved aluminum top, R=range or XR=extra range
– Anodized aluminum body with male threads, 8AN ORB or 3/8″ NPT
– Stainless steel hardware
– Rubber vacuum hose, 4mm ID
– Vacuum hose Y-fitting

Part Numbers

FPD-R, 8AN ORB
Retail: $89.95
FPD-XR, 8AN ORB
Retail: $99.95
FPD-R, 3/8 NPT
Retail: $89.95
FPD-XR, 3/8 NPT
Retail: $99.95

In-Line Fuel Pulse Dampers

The FPD-R (green top) is slightly shorter than the FPD-XR (black top) allowing it to be used in space- constrained applications.

FPD-R base pressure requirement = 40 – 45psi (static)
FPD-XR base pressure requirement = 43 – 78psi (static)

Parts Included

– Anodized/laser engraved aluminum top, R=range or XR=extra range
– Anodized aluminum body threaded for -8AN ORB fittings
– Anodized aluminum O-ring sealed adapter fittings, selectable size
– Stainless steel M6 mounting bolts and nuts
– Rubber vacuum hose, 4mm ID
– Vacuum hose Y-fitting

Part Numbers

FPD-R, Inline, 6AN
Retail: $119.95
FPD-R, Inline, 8AN
Retail: $119.95
FPD-R, Inline, 8AN
Retail: $119.95
FPD-XR, Inline, 6AN
Retail: $129.95
Inline, 8AN
Retail: $119.95
FPD-XR, Inline, 8AN
Retail: $129.95
FPD-XR, Inline, 10AN
Retail: $129.95
 

Read More at:


ignore:
vraceworks, project jdm, full throttle, tristate motorsports

GRAM LIGHTS 57 TRANSCEND WHEELS

GRAM LIGHTS 57 TRANSCEND WHEELS AVAILABLE at CARTRIX

Gram Lights has introduced a new wheel to their collection; the 57 Transcend. The 57 Transcend is a 1- piece cast wheel featuring a 10 spoke design and a concave face. These wheels come in 18″ and 19″ sizes ranging from 7.5-12″ in width. An optional two-step center cap is available in a variety of styles and finishes. The 57 Transcend is offered with a dark gunmetal finish with a machined lip. Another unique feature to this wheel is the machined RAYS logo in the spoke.

Features

– 10 Spoke Design

– RCF Technology [ Light Flow Form Cast Wheel ]

– Machined Rays Logo to decipher from replica

– Optional 2 Step Center Caps

– Super Dark Gunmetal finish

Read More at:


ignore:
vraceworks, project jdm, full throttle, tristate motorsports

GSC POWER DIVISION BILLET CAMSHAFTS: HONDA B-SERIES

GSC POWER DIVISION BILLET CAMSHAFTS: HONDA B-SERIES Available at Cartrix

 

GSC’s billet camshafts for Honda B-Series engines are now available in multiple forgings which cater to individual performance needs. These cams start off as cold-forged alloy steel bars. This means the steel is pressed into its round bar shape rather than molten steel being poured into a mold, as in cast steel cores. The benefit is that the material is both stronger and more dense, leaving no room for pores or imperfections during the forming of the core. This design sets the base for a stronger building block in advanced camshaft development and design process. Furthermore, on high torsion and shock load camshafts with variable valve timing, the billet cores will provide an extremely high level of reliability over the cast core camshafts.

Shear stresses at all undercuts for oil routing journals are met by the stronger cross-sectional area of the billet core vs. the cast core. Shearing at any of these points in variable valve timing equipped engines is now highly unlikely. The fully turned, ground, billet camshafts are also extremely balanced in order to minimize and/or eliminate all types of added harmonics and vibrations. GSC’s billet camshafts also utilized nitride coating, a protective layer and case hardened shell to help aid in strength as well as lobe surface lubrication.

Engine Applications

Honda B16A
Honda B17A
Honda B18C

Part Numbers / Specifications

7015N1
– NA Profile for street and light race use
– Billet Core High lobe (IN/EX) 280/276 Dur, 246/240@1mm, 11.6mm/11.5mm, 104/106 Center

7015N2 
– NA Race profile for aggressive street and race use
– Billet Core High lobe (IN/EX) 296/288 Dur, 266/258@1mm, 12mm/11.5mm, 102/104 Center

7015T1
– Turbo Profile for street and race use
– Billet Core High lobe (IN/EX) 288/276 Dur, 260/254@1mm, 12mm/11.5mm, 109/115 Center

Read More at:

http://www.cartrix.com

http://www.fadiajam.com

https://fadiajam.wordpress.com/

https://plus.google.com/u/0/110265640438657288392


ignore:
vraceworks, project jdm, full throttle, tristate motorsports

WEATHERTECH, NOW IN STOCK AT CARTRIX

WEATHERTECH, NOW IN STOCK AT CARTRIX

WeatherTech is here at Cartrix! WeatherTech produces automotive protection accessories such as floor liners, cargo mats, bug shields, mud flaps, side window deflectors, bed liners, car covers, and more. With one of the largest application lists, WeatherTech supports almost every make and model in the automotive marketplace.

Company Background

Since 1989, MacNeil Automotive, the parent company of WeatherTech, has been providing the best in automotive protection and vehicle accessories. The WeatherTech brand has been servicing the world with top-of-the-line vehicle protection, continually exceeding expectations and setting the industry bar that much higher. In fact, MacNeil currently supplies accessories to all four German manufacturers of luxury automobiles as well as a host of other automobile manufacturers worldwide.

Product Lines

Interior Protection

FloorLiner DigitalFit

Floor Mats All-Weather

Cargo Liner for Cars, SUVs and Minivans

AVM All-Vehicle Mats

AVM – Universal Cargo Mat

TechShade Windshield Sun Shade

Exterior Protection

Side Window Deflectors

TechLiner Bed and Tailgate Protection

UnderLiner Bed Liner

MudFlap No-Drill DigitalFit

Stone & Bug Deflector

License Plate Frames

BumpStep Helps Prevent Bumper Damage

Billet BumpStep Helps Prevent Bumper Damage

Sunroof Wind Deflector

LampGard Headlight Protection

Vehicle Care

TechCare Auto Detailing & Cleaning

Car Covers

Battery Charger

Accessories

CargoTech Cargo Containment System

RackSack Rooftop Cargo Carrier

Pet Barrier

Racing Gear

PetSTEP

TechFloor

Read More at:

http://www.cartrix.com

http://www.fadiajam.com

https://fadiajam.wordpress.com/

https://plus.google.com/u/0/110265640438657288392


ignore:
vraceworks, project jdm, full throttle, tristate motorsports